MANUAL OPERATION
Rotate the unlocking device cover and put
the key into the cylinder
Rotate the key of 90° clockwise
Rotate the unlocking device of 180°
GI.BI.DI. advises recycling the plastic components and to dispose of them at special authorised centres
for electronic components thus protecting the environment from polluting substances.
DISPOSAL
GIVE THE USER THIS SHEET GIVE THE USER THIS SHEET
CE Declaration of conformity
The manufacturer:
GI.BI.DI.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) ITALY
Declares that the products:
ELECTROMECHANICAL GEARMOTOR PASS 1200-1800-2500
Are in conformity with the following CEE Directives:
•
EMC Directive 2004/108/CE and subsequent amendments;
and that the following harmonised standards have been applied:
•
•
Data 03/04/17
S.r.l.
Directive and subsequent amendments;LVD 2006/95/CE
•
EN60335-1,
EN61000-6-1, EN61000-6-3
Moreover declares that the product must not be used until the machine in which it has
been incorporated has not been declared in accordance with 2006/42/CE Directive.
The legal Representative
Michele Prandi
UK
UK
20
PASS
21
PASS
To Next Page
Loading...
Need help?
General
