- 48 -
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
& CPPC Preferred Cores
(Note 1)
Enables or disables the CPPC Preferred Cores feature. (Default: Auto)
& Active OC Tuner
(Note 2)
Enables or disables the Active OC Tuner feature. (Default: Disabled)
& ExtremeMemoryProle(X.M.P.)
(Note 2)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance
when enabled.
Disabled Disables this function. (Default)
Prole1 UsesProle1settings.
Prole2
(Note 2)
UsesProle2settings.
& XMP High Frequency Support
(Note 2)
Allowsyoutoselectthecompatibilitylevelforhigh-frequencymemory.Thisitemiscongurableonly
when ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2. (Default: Auto)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& FCLK Frequency
AllowsyoutosettheFCLKfrequency.Optionsare:Auto(default),667MHz~4000MHz.
& UCLK Mode
Allows you to specify the UCLK mode. (Default: Auto)