GIGA-BYTE TECHNOLOGY X570S AORUS MASTER User Manual

- 68 -
Conguring a RAID Set
3-2 Installing the RAID Driver and Operating System
With the correct BIOS settings, you are ready to install the operating system.
A. Installing Windows
AssomeoperatingsystemsalreadyincludeRAIDdriver,youdonotneedtoinstallseparateRAID/AHCIdriver
during the Windows installation process. After the operating system is installed, we recommend that you install
all required drivers from the GIGABYTE APP Center to ensure system performance and compatibility. If the
operating system to be installed requires that you provide additional RAID driver during the OS installation
process, please refer to the steps below:
Step 1:
Go to GIGABYTE's website, browse to the motherboard model's web page, download the AMD RAID Preinstall
DriverleontheSupport\Download\SATA RAID/AHCIpage,unziptheleandcopythelestoyourUSB
thumb drive.
Step 2:
Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting you
to load the driver appears, select Browse.
Step 3:
Insert the USB thumb drive and then browse to the location of the driver. When a screen as shown in Figure
1 appears, select AMD-RAID Bottom DevicerstandclickNext to load the driver. Then select AMD-RAID
Controller and click Next to load the driver. Finally, continue the OS installation.
Figure 1

GIGA-BYTE TECHNOLOGY X570S AORUS MASTER Specifications

General

Brand	GIGA-BYTE TECHNOLOGY
Model	X570S AORUS MASTER
Category	Motherboard
Language	English