To Next Page

To Previous Page

BIOS Setup

- 51 -

& Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.

Wakeuphour/minute/second:Setthetimeatwhichthesystemwillbepoweredonautomatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

& High Precision Event Timer

Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)

 IO Ports

& Initial Display Output

 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscard.

PCIe1Slot   SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)

PCIe2Slot   SetsthegraphicscardonthePCIEX8slotastherstdisplay.

PCIe3Slot   SetsthegraphicscardonthePCIEX4slotastherstdisplay.

& Integrated Graphics

(Note)

Enables or disables the onboard graphics function.

Auto The BIOS will automatically enable or disable the onboard graphics

depending on the graphics card being installed. (Default)

Forces Enables the onboard graphics.

Disabled Disables the onboard graphics.

& UMA Mode

(Note)

Specify the UMA mode.

Auto     LetstheBIOSautomaticallycongurethissetting.(Default)

UMASpecied   SetstheUMAFrameBufferSize.

UMA Auto Sets the display resolution.

UMAGameOptimized Adjuststheframebuffersizebasedonthetotalsystemmemorysize.

 ThisitemiscongurableonlywhenIntegrated Graphics is set to Forces.

(Note) This item is present only when you install a CPU that supports this feature.

GIGA-BYTE TECHNOLOGY X570S AORUS MASTER User Manual

Questions and Answers: