Gigabyte 7002 Series - Page 103

- 54 - BIOS Setup
5-3-3-1-1 DRAM Controller Conguration
Parameter Description
DRAM Controller Conguration
DRAM Power Options
Press [Enter] to congure DRAM Power OptionsMa.

Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Cmd2T
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is Auto.
Gear Down Mode
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.