Gigabyte 7002 Series - Page 115

- 54 - BIOS Setup
Parameter
Description
Hot Plug Handling mode
Controls the Hot Plug Handling mode.
Options available: Auto, A0 Mode, OS First (No Error Handling),
OS First (Error Handling-Not Implemented), Firmware First (Not Implemented).
Default setting is Auto.
Presence Detect Select
mode
Controls the Presence Detect Select mode.
Options available: Auto, OR, AND. Default setting is Auto.
Preferred IO Device
Congures Preferred IO Device.
Options available: Auto, Manual. Default setting is Auto.
Loopback Mode
Enabled/Disabled PCIe Loopback mode.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
CV test
Set this to Enabled to support running PCIECV tool.
Auto: preserve hardware defaults.
Options available: Auto, Enabled, Disabled. Default setting is Auto.