Gigabyte 7002 Series - Page 13

- 13 - Hardware Installation
Socket
Socket
Storage
R152-Z30
 4 x 3.5" SAS/SATA hot-swappable HDD/SSD bays
 SAS card is required for SAS devices support
R152-Z31  8 x 2.5" SAS/SATA, 2 x 2.5" U.2 hot-swappable HDD/SSD bays
 SAS card is required for SAS devices support
R152-Z32
R152-Z33
 10 x 2.5" NVMe hot-swappable SSD bays
Socket
Socket
SAS  Supported via add-on SAS Card
Socket
Socket
Front Panel
LED/Buttons
R152-Z30
 2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
R152-Z31
R152-Z32
R152-Z33
 1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
Socket
Socket
Rear Panel I/O  3 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Socket
Socket
Backplane I/O
R152-Z30
 Backplane P/N: 9CBP1042NR-00
 Speed and bandwidth:
 SAS 12Gb/s, SATA 6Gb/s
R152-Z31  Backplane P/N: 9CBP10A4NR-00
 Speed and bandwidth:
 SAS 12Gb/s, SATA 6Gb/s, PCIe Gen3 x4
R152-Z32
R152-Z33
 Backplane P/N: 9CBP10A3NR-00
 Speed and bandwidth:
 PCIe Gen3 x4
Socket
Socket
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010