Gigabyte 7002 Series - Page 86

BIOS Setup - 86 -
Parameter
Description
Enter Conguration Menu
Press [Enter] to congure advanced items.

Create new VLAN

VLAN ID
– Sets VLAN ID for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
– The valid range is from 0 to 4094.

Priority
– Sets 802.1Q Priority for a new VLAN or an existing VLAN.
– Press the <+> / <-> keys to increase or decrease the desired values.
– The valid range is from 0 to 7.

Add VLAN
– Press [Enter] to create a new VLAN or update an existing VLAN.

Congured VLAN List

Remove VLAN
– Press [Enter] to remove an existing VLAN.