Appendix - 100 -
• Performing the Rebuild in the Operating System
While in the operating system, make sure the Chipset driver has been installed from the motherboard driver
disk. Then launch the Intel Rapid Storage Technology utility from All Programs in the Start menu.
Step 1:
Go to the Manage menu and click Rebuild to
another disk in Manage Volume.
The Status item on the left of the screen dis-
plays the rebuild progress.
Step 2:
Select a new drive to rebuild the RAID and click
Rebuild.
Step 3:
After the RAID 1 volume rebuilding, the Status
will display as Normal.
To Next Page
Loading...
Need help?
General
