Gigabyte GA-X58A-OC - Page 28

Hardware Installation - 28 -
1
DIP
1 2 3
6) HP_PWR/HP_PWR1 (Heatsink LED Power Connectors)
The power connectors provide power to the LEDs on the North Bridge and South Bridge heatsinks.
Pin No. Denition
1 VCC
2 GND
1
7) ATX4P1/ATX4P4 (PCIe Power Connectors)
The power connectors provide auxiliary power to the onboard PCI Express x16 slots. When two or more
graphics cards are installed, we recommend that you connect the SATA power cable(s) from the power
supply to the ATX4P1/ATX4P4 connector to ensure system stability. For 4-way CrossFireX™, you must
connect at least one of the ATX4P1 and ATX4P4 connectors.
1
DIP
1 2 3
Pin No. Denition
1 NC
2 NC
3 NC
4 GND
5 GND
6 GND
7 VCC
8 VCC
9 VCC
10 GND
11 GND
12 GND
13 +12V
14 +12V
15 +12V
F_USB30
F_AUDIO(H) DB_PORT
F_PANEL(NH) F_PANEL
(H61M-D2)
TPM w/housing
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
DIP
1 2 3
DIP
1 2 3
DIP
1 2 3
DIP
123
1
1
1
1
BIOS Switcher (X58A-OC)
PWM Switch (X58A-OC)
15
1