Gigabyte GA-X79-UP4 - Page 75

- 75 -
Appendix
OnthemainscreenoftheRAIDsetuputility(Figure4),usetheleftorrightarrowkeytomovethroughtabs.
Figure 4
Figure 5
Create a RAID Array:
Step 1: On the main screen, press <Enter> on the RAID tab. Then the
RAIDCongmenuappears(Figure5).
Press <Enter> on the Create VD item.
ENTER/SPACE: Select, ESC: Back/Exit
Adapter 0
[ Adapter ] [ Devices ] [ RAID ]
Vendor ID Device ID:
1B4B:91A2
BIOS Version: 1.0.1.0025
PCI Slot: 00
IRQ Number: 0A
Raid Mode: RAID0 RAID1
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
ENTER/SPACE: Select, ESC: Back/Exit
[ Adapter] [ Devices]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ RAID ]
Delete VD
Wipe out disk
Spare Management
RAID Cong
Create VD