Gigabyte GA-X79-UP4 - Page 76

Appendix
- 76 -
Figure 6
Step 2: The next screen displays the two hard drives you installed. Press <Enter> or <Space> on the two hard
drivesrespectivelytoaddthemintotheRAIDarray.Selectedharddrivesaremarkedwithanasterisk(Figure
6).Thenpress<Enter>onNEXT.
Figure 7
Step 3: On the Create VD
menu(Figure7),usetheupordownarrowkeytomovetheselectionbartoselect
an item and press <Enter> to display options. Set the required items in sequence and press the down arrow
key to proceed to the next item.
Sequence:
1. RAID Level:SelectaRAIDlevel.OptionsincludeRAID0(Stripe)andRAID1(Mirror).
2. Stripe Size:Selectthestripeblocksize.Optionsinclude32KB,64KB,and128KB.
3. Quick Init: Select whether to quickly erase old data on the hard drives when creating the array.
4. Cache Mode: Select write-back or write-through cache.
5. VD Name:Enteranarraynamewith1~10letters(letterscannotbespecialcharacters).
ENTER/SPACE: Select, ESC: Back/Exit
[ Adapter] [ Devices]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ RAID ]
RAID Cong
Port Disk Name Size Max Speed Status
* S1 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
NEXT
Select free disks to create
* S0 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
ENTER/SPACE: Select, ESC: Back/Exit
[ Adapter] [ Devices]
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ RAID ]
RAID Cong
Port Disk Name Size Max Speed Status
* S0 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
* S1 SATA: WDC WD800JD-22LSA0 76.3GB SATA 3Gb/s FREE
Select free disks to create
RAID Level :
Max Size (MB): 152478
Stripe Size : 64KB
Quick Init : NO
Cache Mode : WriteBack
VD Name :
Disks ID : 01
NEXT
Create VD
RAID0