Gigabyte MS04-CE0 - Page 101

- 101 -
BIOS Setup
Parameter
Description
Restore Defaults
Loads the default settings for all BIOS setup parameters. Setup Defaults
are quite demanding in terms of resources consumption. If you are using
low-speed memory chips or other kinds of low-performance components
and you choose to load these settings, the system might not function
properly.
Options available: Yes, No.
Save the User Default Values
Saves the changes made as the user default settings.
Options available: Yes, No.
Restore the User Default
Values
Loads the user default settings for all BIOS setup parameters.
Options available: Yes, No.
Boot Device Priority
Press [Enter] to congure the device as the boot-up drive.
Launch EFI Shell
Attempts to Launch EFI Shell application (Shell.e) from one of the
available le system devices.
Parameter
Description
Save Options
Save and Exit
Saves changes made and closes the BIOS setup.
Options available: Yes, No.
Discard changes and exit
Discards changes made and exits the BIOS setup.
Options available: Yes, No.
Save Changes and Reset
Restarts the system after saving the changes made.
Options available: Yes, No.
Discard Changes and Reset
Restarts the system without saving any changes.
Options available: Yes, No.
Save Changes
Saves changes done so far to any of the setup options.
Options available: Yes, No.
Discard Changes
Discards changes made and closes the BIOS setup.
Options available: Yes, No.
Default Options