Gigabyte MS04-CE0 - Page 56

- 56 -
BIOS Setup
Parameter
Description
NIC Conguration
Press [Enter] to congure advanced items.

Link Speed
– Default setting is Auto Negotiated.

Wake On LAN
– Enables power on of the system via LAN. Note that conguring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled, Disabled. Default setting is Enabled.

LLDP Agent
– Enable/Disable rmware's LLDP Agent.
– Options available: Enabled, Disabled. Default setting is Enabled
Blink LEDs
Identies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values (up to 15 seconds).
UEFI Driver
Displays the technical specications for the Network Interface Controller.
Adapter PBA
Displays the technical specications for the Network Interface Controller.
Device Name
Displays the technical specications for the Network Interface Controller.
Chip Type
Displays the technical specications for the Network Interface Controller.
PCI Device ID
Displays the technical specications for the Network Interface Controller.
PCI Address
Displays the technical specications for the Network Interface Controller.
Link Status
Displays the technical specications for the Network Interface Controller.
MAC Address
Displays the technical specications for the Network Interface Controller.
Virtual MAC Address
Displays the technical specications for the Network Interface Controller.