Gigabyte MS04-CE0 - Page 99

- 99 -
BIOS Setup
Parameter
Description
FIXED BOOT ORDER Priorities
Boot Option #1 / #2 / #3 / #4 / #5
Press [Enter] to congure the boot order priority.
By default, the server searches for boot devices in the following
sequence:
1. Hard drive.
2. CD-COM/DVD drive.
3. USB device.
4. Network.
5. UEFI.
UEFI Application Boot Priorities
Press [Enter] to congure the boot priority.
Parameter
Description
Boot Conguration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
means indenite waiting.
Press the numeric keys to input the desired values.
Bootup NumLock State
Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is On.
Quiet Boot
Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is Enabled.
Endless Retry Boot
Options available: Disable, Enable. Default setting is Disable.
Setup Flash
Press [Enter] to run setup ash.
Dump full Setup Data
Press [Enter] to dump full setup data to le.
Dump non-default Setup Data
Press [Enter] to dump non-default setup data to le.
Restore Setup Data
Press [Enter] to restore setup data from le.