Gigabyte R161-R12 - BMC Network Configuration

- 107 - BIOS Setup
5-5-4 BMC Network Conguration
Parameter
Description
BMC network conguration
Select NCSI and Dedicated
LAN
Switch NCSI and dedicated LAN and send KCS command.
Options available: Do Nothing, Mode1 (Dedicated), Mode2(NSCI), Mode3
(Failover).
Default setting is Mode1 (Dedicated).
Lan Channel 1
Conguration Address source
Select to congure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecied, Static, DynamicBmcDhcp. Default setting
is DynamicBmcDhcp.
Station IP address
Displays IP Address information.
Subnet mask
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Router IP address
Displays the Router IP Address information.
Station MAC address
Displays the MAC Address information.
Real-time get BMC network
address
Press [Enter] will set LAN mode and Address source and then get IP,
Subnet, Gateway and MAC address.