Gigabyte R161-R12 - PCH-IO Configuration

BIOS Setup - 64 -
5-3-1 PCH-IO Conguration
Parameter
Description
PCH-IO Conguration
SATA And RST
Conguration
Press [Enter] to congure advanced items.

SATA Controller
– Enable/Disable SATA device.
– Options available: Enabled/Disabled. Default setting is Enabled.

SATA Mode Selection
– Congures on chip SATA type.
– AHCI Mode: the SATA controller enables its AHCI functionality.
Then the RAID function is disabled and cannot be access the RAID
setup utility at boot time.
– Intel RST Premium: the SATA controller enables both its RAID and
AHCI functions. You will be allowed to access the RAID setup utility
at boot time.
– Options available: AHCI/Intel RST Premium. Default setting is
AHCI.

SATA Port 0/1/2/3/4/5/6/7
– The category identies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.

Port 0/1/2/3/4/5/6/7
– Enable/Disable Port 0/1/2/3/4/5/6/7 device.
– Options available: Enabled/Disabled. Default setting is Enabled.

Hot Plug (for Port 0/1/2/3/4/5/6/7)
– Enable/Disable SATA ports Hot Plug support.
– Options available: Enabled/Disabled. Default setting is Enabled