Gigabyte R161-R12 - Page 116

BIOS Setup - 116 -
Parameter
Description
Discard Changes and Reset
Restarts the system without saving any changes.
Options available: Yes/No.
Save Changes
Saves changes made in the BIOS setup.
Options available: Yes/No.
Discard Changes
Discards changes made and closes the BIOS setup.
Options available: Yes/No.
Default Options
Restore Defaults
Loads the default settings for all BIOS setup parameters. Setup Defaults
are quite demanding in terms of resources consumption. If you are using
low-speed memory chips or other kinds of low-performance components
and you choose to load these settings, the system might not function
properly.
Options available: Yes/No.
Save as User Defaults
Saves the changes made as the user default settings.
Options available: Yes/No.
Restore User Defaults
Loads the user default settings for all BIOS setup parameters.
Options available: Yes/No.
Restore User Defaults 1 from
USB
Restore the user defaults 1 to all the setup options from USB.
Boot Override
Press [Enter] to congure the device as the boot-up drive.