Gigabyte R161-R12 - Page 84

BIOS Setup - 84 -
Parameter
Description
IIO Error Enabling
IIO/PCH Global Error
Support
Enable/Disable IIO/PCH Error Support.
Options available: Enable/Disable. Default setting is Enable.
IIO MCA Support
Enable/Disable IIO MCA Support.
Options available: Enable/Disable. Default setting is Disable.
IIO Error Pin Programming
Enable/Disable IIO Error Pin Programming.
Options available: Enable/Disable. Default setting is Disable.
IIO Error Registers Clear
Enable/Disable clearing IIO Error registers.
Options available: Enable/Disable. Default setting is Enable.
IIO LER Support
Enable/Disable IIO LER Support.
Options available: Enable/Disable. Default setting is Disable.
IIO Coherent Interface Error
Enable/Disable IIO Coherent Interface Error.
Options available: Enable/Disable. Default setting is Enable.
IIO IRP0 protocol parity error
Enable/Disable Coherent Interface protocol IIO parity error reporting.
Options available: Enable/Disable. Default setting is Enable.
IIO IRP0 protocol qt overow
underow error
Enable/Disable IIO Coherent Interface protocol queue table overow or
underow error reporting.
Options available: Enable/Disable. Default setting is Enable.
IIO IRP0 protocol rcvd
unexprsp
Enable/Disable IIO Coherent Interface protocol layer received unexpected
response or completion error reporting.
Options available: Enable/Disable. Default setting is Enable.
IIO IRP0 csr acc 32b
unaligned
Enable/Disable IIO Coherent Interface CSR Access Crossing 32-bit
Boundary error reporting.
Options available: Enable/Disable. Default setting is Enable.