8. TECH SPECS
Physical size: 29cm x 13cm x 7.8cm / 11.4" x 5.1" x 3.07"
Screen size: Approximately 5 x 3.8cm / 1.96"x 1.5"
Weight: 1.65kgs / 3.64lbs
Power Requirements: 9V DC (2.1mm centre neg) @ 650mA.We recommend the use of The GigRig Generator
power supply supplied with The G3 Switching System. (Strymon Zuma, True Tone 1-Spot and Voodoo Labs
Pedal Power 2 have been tested to power G3 sufficiently).
Input impedance 1M Ohm
Out 1 - Signal path with input and output amps OFF – True Bypass
Out 1 is earthed and must always be connected to ground.
Out 2 - Signal path with input and output amps OFF – Buffered and Isolated
Out 2 is transformer isolated and phase reversible.
Input signal handling Maximum = 16.5V dBV peak to peak in true bypass.
Signal Bandwidth = 4Hz to 150KHz
Pre Gain/Buffer and Post Gain Stereo VCA Output Amplifier/Buffer
Minimum gain -30dBu
Maximum Gain +8dBu
Bandwidth at 1V = 4Hz to 150KHz.
Buffer output impedance 1K Ohms
Noise. 4.7nV per root Hz
This specification is subject to change without notice. Consult our Web site for amendments.
www.thegigrig.com
To Next Page
Loading...
Need help?
General
