5.2.1 ATOM STUFF
5.2.2 NAME - NAMING PRESETS
To edit the preset name, press and you will see the flashing cursor on the selected letter.
Move the cursor across using button and scroll up and
down through the character set using
Once you are done, either use to get back to
the main menu or press to exit.
5.2.3 MIDI
Scroll down the Deep Edit menu to MIDI and then scroll right to enter the MIDI menu.
The G3 Atom’s MIDI capability allows you to send up to 15 individual MIDI
messages on each preset. These can be PC (Program Change), CC (Control
Change) or EXP (Expression Pedal) MIDI messages.
The G3 Atom also has a MIDI Clock and a separate MIDI Tap Tempo feature.
MIDI Menu screen – to edit, scroll down to each of the 15 available
MIDI messages.
Scroll right to edit the selected MIDI command.
Scroll right again to select between PC (Programme Change), CC (Control
Change) or EXP (Expression pedal).
Scroll right again to select the Value (if CC is selected, scroll right again to
select the CC number).
Choose the MIDI command that you want to send - in this example we will choose PC - then scroll to the right
to choose the MESSAGE number or channel VALUE number etc.
To Next Page
Loading...
Need help?
General
