5.2.4 EXPRESSION – EXPRESSION PEDAL PRE/POST GAIN
You also have the option to set up the Expression Pedals to control the PRE and POST GAIN in the Atom - for
example, as a volume control, using the PRE GAIN to control the levels going into your effects or using the POST
GAIN as a master volume control.
a. Select EXPRESSION from the Main Menu
b. Scroll to select either PRE GAIN or POST GAIN
c. Select your Heel and Toe values
Your expression pedal will now control Pre and/or Post Gain levels.
Remember you must have your Pre or Post Gain selected on this preset to be able to control the levels with your
Expression Pedal.
5.2.5 LOOP ORDER
With the G3 Atom, you can reorder your effects loops in any way you like:
a. Go to LOOP ORDER on the Deep Edit menu.
b. Scroll right and you will see Loops 1-6 which correspond to your effects
loops. As the Atom’s loop’s feature TRS connections, you can arrange each
side of each loop independently (INSERT DIAGRAM)
c. Use the EFFECTS LOOPS push buttons along the centre panel of the Atom
to order the loops, as desired.
The numbers will change positions to reflect the order chosen.
5.2.6 STOMPBOX – See Section 4.2
To Next Page
Loading...
Need help?
General
