GILBARCO VEEDER-ROOT BRCM2.X - Page 24

Page 24 MDE-5265E BRCM2.x Installation and Upgrade Instructions · April 2021
Upgrading to BRCM2.x
Figure 18: Field Wiring Board on Back Side of D-Box Board Plate (Passport Only)
P400
(High-speed 
Connection)
P416
24 VDC
To Optional Second
D-Box Board
To D-Box Board
To CRINDs 
in Dispensers
9-16
To CRINDs 
in Dispensers 1-8
Connectors to D-Box Boards
Connectors to Dispensers
Note: This example is typical for Passport POS.
Field Wiring Board
Figure 19: Example for Generic CRIND
To Second D-Box Board, 
Talking CRIND
To First D-Box Board, 
Talking Pump
To CRINDs in
Dispensers 1-8
To Pumps in
Dispensers 1-8
Note: The CRIND connection must mate directly to the D-Box board.