MDE-5265E BRCM2.x Installation and Upgrade Instructions · April 2021 Page 25
Upgrading to BRCM2.x
4 Reseat the field wiring tray and reconnect all board power and other connections.
Figure 20: Repositioning New Field Wiring Tray
5 Connect the AC power cord into the wall outlet and to the lid.
Note: If the unit does not power up, ensure that the power
switch on the inside lid is in the ON
position.
Figure 21: Connecting AC Power Output Cord into Lid
Power Switch
AC Power
Output Cord
To Next Page
Loading...