Gill WindSonic User Manual

WindSonic Doc No 1405 PS 0019 Issue 28 November 2019
44
Select the required COM Port from the drop down list.
Select the required Baud rate from the drop down list.
Parity should be set to None.
If the Baud rate setting of the Anemometer is unknown then the Auto Find button can be
used to interrogate the Anemometer and detect the required setting.
Click on the Connect button.
Data should scroll on the screen as follows (Data button).

Gill WindSonic Specifications

General

Brand	Gill
Model	WindSonic
Category	Measuring Instruments
Language	English