Gill WindSonic User Manual

WindSonic Doc No 1405 PS 0019 Issue 28 November 2019
45
Clicking on the Anemometer 1 Windsock button gives the following display.
To Change WindView Display Settings
Click on the top of Screen menu Settings.
To change displayed units select and click on required measurement units. If for instance the
sensor data was outputting metres per second data then WindView performs the calculation
to convert and display the output in knots/mph/kph etc.

Gill WindSonic Specifications

General

Brand	Gill
Model	WindSonic
Category	Measuring Instruments
Language	English