22
Auto Ref/Keratometer GRK-7000 -------------------------------------------------------------
4. Installation of Printing Paper
Please refer to section 9.2 regarding the sequence of installation of printin
g paper.
5. Input of Message
Input the contents desirable to be printed such as name or address of hos
pital, etc in the memory of message editing monitor in advance at all time
s.
6. Check of Setup
As for setup of corneal vertex distance, indication of CYL, unit of SPH/CYL, i
ndication type of corneal measurement, corneal equivalent curvature, date, e
tc, please check them in SETUP mode.
7. Transmission to Other Machines
In case of transmitting the measured results to other machines, prepare ot
her machines while connecting the cable into the interface connector of thi
s machine. You can select the transmitting speed in the user’s SETUP mod
e. Please contact to the agent where you bought this machine for details.
[ Figure 6. Inserting Chin-rest Paper ]
To Next Page
Loading...
Need help?
General