Gilras GRK-7000 User Manual

------------------------------------------------------------- Auto Ref/Keratometer GRK-7000
47
8.2.2. Auto Measurement Mode
As pushing Auto button in Manual measurement mode, it is to be changed to
Auto measurement mode. As the condition of good array between the machine
and measured eye is reached, the measurement is to be performed without pu
shing the measurement button.
1
Adjust the array and focus as like in procedure
○
2
of section 8.1.1
2
The measurement is to be performed automatically as like in procedure
○
2
of section 8.1.2
3
Print the measured result as like in procedure
○
6
of section 8.1.1
8.3. Corneal Curvature/Refractive Power Measurement Mode
(K&R Mode)
This is the mode to consecutively perform the measurement of corneal curvatur
e and refractive power.
1. Check whether or not the measurement screen appears on the screen of mo
nitor.
2. Keep pushing MODE button while selecting K&R measurement mode until “K
&R” is to be indicated on the upper right side of the screen.
3. Perform the same procedure as ○
2
, ○
3
procedure in consecutive measurement
of refractive power.
8.3.1. Manual Measurement Mode

Gilras GRK-7000 Specifications

General

Brand	Gilras
Model	GRK-7000
Category	Measuring Instruments
Language	English