------------------------------------------------------------- Auto Ref/Keratometer GRK-7000
27
If the following situations happen, contact to the agents of GILRAS afte
r immediately pushing the power switch off, and pulling the power cor
d out of AC Power connection part.
● In case that smoke comes, or strange smell or sound is heard from
the equipment.
● In case that liquid is poured to the machine, or metallic substance i
s inputted into the equipment.
● In case that the equipment is fallen down, or the exterior case of it
is broken
The refractive power value measured according to the value of VD (Vertex Dista
nce) is to be indicated in the mode of refractive power measurement. As pushin
g VD button, the refractive value according to VD value is to be indicated while
the value of VD changes from 0.0 to the values (12/13.5/15mm) selected in use
r SETUP Mode.
To Next Page
Loading...
Need help?
General