------------------------------------------------------------- Auto Ref/Keratometer GRK-7000
51
- In the measurement mode including the refractive power measurement, y
ou can designate the sign of astigmatic refractive power in SETUP mode.
- Also, you can indicate the measured data of refractive power on the scre
en according to VD value in the measurement mode including the refracti
ve power measurement.
- In the measurement mode including corneal curvature measure, you can
designate the screen indication type (R1/R2/AXK1/K2/AXAR/CY/AX) in
SETUP mode.
8.3.2. Auto Measurement Mode
As pushing Auto button in manual measurement mode, it is to be changed to a
uto measurement mode.
As the condition of good array between the machine and measured eye is to b
e reached, the measurement is to be performed automatically without pushing t
he measurement button in Auto measurement mode.
① Adjust the array and focus as like in procedure 2 of section 8.1.1.
② The measurement is to be performed automatically as like in procedure 2 of
section 8.1.2.
③ Print the measured result as like in procedure 6 of section 8.1.1.
To Next Page
Loading...
Need help?
General