------------------------------------------------------------- Auto Ref/Keratometer GRK-7000
77
① The equipment should be kept as clean basically. Do not use the solvents s
uch as strongly volatile substance, thinner, benzene, etc.
② Put some soapy water to the soft cloth, and twist the water out of the cloth.
Then, polish each part of the equipment.
③ As polishing the parts of lens or glass, get rid of dusts on the surface of l
ens with wind-blower and use a dry cloth.
9.4. As changing the installation place of the equipment
1
Off the power switch of main body.
2
Take the power connection cable apart.
3
Lock the clamping bolt by rotating it clockwise.
4
Move it while maintaining the horizontality of it by holding the bottom of t
he main body.
- To dispose the instrument, accessories, and components, foll
ow local governing ordinances and recycling plans regardin
g disposal or recycling of instrument or device components.
Especially a lithium battery may pollute the environment if
the instrument or a lithium battery is abandoned.
To Next Page
Loading...
Need help?
General