74
Auto Ref/Keratometer GRK-7000 -------------------------------------------------------------
As red line appears on the paper, immediately change the print paper with new
one.
① Open the printer cover.
② Cut the paper inserted in the printer, and take it away from it.
Take paper roll together with shaft out of the printer, and pull the rotating
shaft away from paper roll.
③ Put the rotating shaft into the new roll.
④ Put the paper inserted with the rotating shaft into the printer case.
⑤ Fix the paper onto the printer. At this time, adjust the length of paper so th
at it can come out from the paper outlet of the printer cover.
⑥ Close the cover after inserting the end of paper into the hole of cover.
[ Figure 28-4.
Closing cover ]
To Next Page
Loading...
Need help?
General