40
Auto Ref/Keratometer GRK-7000 -------------------------------------------------------------
③ Measurement of Another Eye
- Measure the left eye according to the same procedure by moving the sta
ge to the right side.
- As the measurement to both eyes is completed, the value of PD is to be
indicated automatically on the screen of monitor.
④ Print
- Push the PRINT button in case that the measurement is conducted to the
one eye only.
- In case of selecting the condition of A-PRT as “ON” in Setup mode (refer
to section 8.7), the measured result is to be printed automatically as the
measurement of both eyes is completed.
- The message selected in Setup mode is to be printed together with the
measured data.
[ Figure 18-2. Screen indicating Auto Measurement Mode(AUTO-
5)]
To Next Page
Loading...
Need help?
General