9
Warnings
If the results obtained do not correspond to the well being
of the user, proceed with a check up of the multiCare-in
instrument and contact your physician.
If extreme results are obtained, too high (Hi) or too low (Lo),
contact your physician immediately.
When the measuring is nished, it is possible to turn OFF the multiCare-in
instrument. The instrument will shut down automatically after 60 seconds
if not used for other operations.
The measured value, along with date and time, will be saved in position 1
in the memory of the instrument.
The values previously measured will be saved in positions 2, 3 etc. starting
from the most recent. How to recall from the memory a measured value
and how to erase memorized values is described on page 12.
The strips and the used materials have to be
properly disposed, avoiding contamination. The
meter has to be disposed following the Electric and
Electronic Waste law.
In a laboratory and in a hospital, the procedures
of biological safety must be followed when
handling potentially infected material, in particular
when measurements are performed on different
patients.
To avoid infections clean the instrument regularly
and dispose of the used strips in a way that there is
no risk of infections for other people.
+
Manuale MCIN UK_ED2013 APRILE MFAP Definitivo.indd 9 13/06/2013 16:52:38
To Next Page
Loading...
Need help?
General
