Gima multiCare-in User Manual

4
Coding the meter
The multiCare-in meter uses a data-chip that is inside the strips
box. It will be necessary to change the data-chip in the following
cases:
a. before using a new strips box
b. when you want to change the analyte
1. Remove the data-chip from the strips box.
2. Insert the data-chip in the proper space in the lateral
part of the meter.
3. Gently press the data-chip up to the complete insertion.
Manuale MCIN UK_ED2013 APRILE MFAP Definitivo.indd 4 13/06/2013 16:52:36

Gima multiCare-in Specifications

General

Brand	Gima
Model	multiCare-in
Category	Personal Care Products
Language	English