Application of the blood
Read carefully the instruction for use of the strips that you want to use to
perform the measurement.
1. Press the Power button after inserted
data-chip.
The number that appears on the display
has to match the one printed on the strips
vial.
If it does not match, contact Customer
Service.
2. Take a strip from the vial and insert it in the meter with the printed or
coloured part on the upper side. You will hear a click and the meter will
emit an acoustic signal.
Procedure to test glucose:
3a. Perform the prick on the nger with the
lancing device.
Apply a drop of blood on the part of the
strips that comes outside the meter.
Let the strip aspirate the blood up to see
the moving segments on the display.
If the volume is not sufcient the measurement does not start.
7
Manuale MCIN UK_ED2013 APRILE MFAP Definitivo.indd 7 13/06/2013 16:52:38
To Next Page
Loading...
