Need help?Do you have a question about the Ginetta G55 GT4 and is the answer not in the manual?
General| Brand | Ginetta |
|---|---|
| Model | G55 GT4 |
| Category | Automobile |
| Language | English |
Outlines the standard and Super Cup configuration for the Ginetta G55 GT4.
Lists modifications to the standard spec for the GT4 variant of the car.
Lists modifications to the standard spec for the PWC variant of the car.
Details the recommended wheel and tyre sets for race weekends.
Explains the use of a charged gas bottle for the car's air jacks.
Describes the air lance used to connect the gas bottle to the car.
Details the air jack and gas bottle regulator settings and supply.
Explains the need for a download lead to retrieve data from the car's ECU.
Describes the dump churn for quick and easy refuelling of the car.
Lists common tools required for maintenance and adjustments.
Lists specialized tools needed specifically for the G55 model.
Step-by-step guide on how to remove the car's bonnet.
Details the procedure for removing the rear section of the car's bodywork.
Instructions on how to safely raise the car using the air jack system.
Instructions on how to safely lower the car using the air jack system.
Provides specific settings for the car in dry track conditions.
Provides specific settings for the car in wet track conditions.
Details specific adjustments for ride height, camber, toe, and anti-roll bars.
Provides recommended tyre pressures for RH and LH circuits.
Displays graphs illustrating the performance characteristics of the front and rear dampers.
Details fuel requirements, usage, and filling procedures.
Emphasizes the importance of regular spanner checks and using checklists.
Lists the types and quantities of engine oil, gearbox oil, and other fluids.
Explains how to check and fill brake and clutch fluid reservoirs.
Provides a method for checking engine oil levels when the engine is hot.
Details how to check the power steering fluid level.
Explains how to check the coolant level and its ideal state.
Discusses preventing rubber debris from entering the sills.
Describes the functions of the five buttons on the steering wheel.
Details the functions of the eighteen buttons on the car's dashboard.
Provides a five-step guide for starting the car's engine.
Covers routine maintenance for the pneumatic paddle shift system.
Lists essential checks to perform while warming up the car.
Details how to verify the radiator fan is operating correctly.
Provides guidance on setting correct cold tyre pressures.
Explains how to correctly identify and fit front and rear wheels.
Specifies the correct torque for wheel nuts.
Ensures the fire extinguisher pin is removed before the car leaves the garage.
A final checklist to ensure the car is ready for qualifying or racing.
Details the procedure and purpose of an installation lap.
Explains the process for bedding in brake discs for competition use.
Describes checks to perform after the car returns from an installation lap.
Step-by-step guide on cleaning the car's air filter.
Explains the procedure for draining the catch tank to prevent oil blow-through.
Details the procedure for safely draining fuel from the car.
To Next Page