Ginetta G55 GT4 User Manual

11
Bodywork Removal
The Ginetta G55 comprises three main pieces of bodywork; the bonnet, the rear section and the main body shell,
shown in the images below. Both the bonnet and the rear section can be removed with relative ease, as outlined
within this section.
Removing The Bonnet
The bonnet is retained with six fasteners; four Aero catches and two over centre style catches. The four Aero catches
are located on the top of the bonnet as indicated in figure 2.3.
Figure 2.3
Figure 2.1
Figure 2.2

Ginetta G55 GT4 Specifications

General

Brand	Ginetta
Model	G55 GT4
Category	Automobile
Language	English