What does OV-ILLC (1052 DATA:0000) mean on my Ginlong Inverter?
If your Ginlong Inverter displays OV-ILLC (1052 DATA:0000), check whether the backup load is overloaded. Restart the system and check if the fault continues.
What does OV-Vbatt-H/ OV-BUS-H (1051 DATA:0000) mean on my Ginlong solis S6 Inverter?
If your Ginlong Inverter displays OV-Vbatt-H/ OV-BUS-H (1051 DATA:0000), check if the battery circuit breaker is tripping and inspect the battery for any signs of damage.
What does GRID-INTF02 (1046 DATA:0000) mean on my Ginlong solis S6 Inverter?
If your Ginlong Inverter displays GRID-INTF02 (1046 DATA:0000), confirm whether the grid is seriously distorted. Also, check whether the AC cable is connected reliably.
How to fix a Ginlong Inverter showing ARC- FAULT (1041 DATA:0000)?
To address an ARC- FAULT (1041 DATA:0000) error on your Ginlong Inverter, verify that all connections within your PV system are tight. If further adjustment is necessary, arc fault settings can be changed in advanced settings.
What does OV-TEM (1032 DATA:0000) mean on my Ginlong solis S6 and how to fix it?
If your Ginlong Inverter displays OV-TEM (1032 DATA:0000), check if the surrounding environment of the inverter has poor heat dissipation. Also, confirm whether the product installation meets the requirements.
What should I do if my Ginlong Inverter displays error code 12Power-FAULT (1038 DATA:0000)?
If your Ginlong Inverter displays the error code 12Power-FAULT (1038 DATA:0000), check for current leakage to ground. Also, verify your grounding and inspect all wires to ensure they are in good condition and not leaking current to ground.
What to do if my Ginlong solis S6 Inverter displays the error DCInj-FAULT (1037 DATA:0000)?
If your Ginlong Inverter shows a DCInj-FAULT (1037 DATA:0000) error, confirm that the grid is not abnormal and that the AC cable connection is secure. Restart the system to see if the fault continues.
General| Rated Grid Frequency | 50Hz/60Hz |
|---|---|
| THDi | <3% |
| DC Switch | Yes |
| Topology | Transformerless |
| Number of MPPT | 2 |
| Rated Grid Voltage | 230V |
| Grid Voltage Range | 180V-280V |
| Protection Degree | IP65 |
| Operating Temperature Range | -25~+60°C |
| Cooling Method | Natural Convection |
To Next Page
