Operating the Gira HomeServer
13
11.2020/V 2.3
3.2.2 Resetting to the factory settings
The device can be reset to the factory settings via USB stick. The firmware version is used
for this, which is part the scope of the HS Expert installation.
Afterwards, the Gira HomeServer has the login data as for initial start-up.
Note the following: all data on the device is deleted during this process.
For more information, refer to the help for the HS Expert.
3.2.3 Resetting the firmware to version 4.8
Application: for users who want to replace an older device with a new device and do not
want to change the project to a newer version.
The device can be reset to the firmware 4.8 factory settings via USB stick.
Afterwards, the Gira HomeServer has the login data as for initial start-up.
For more information, refer to the help for the HS Expert.
3.2.4 Gira HomeServer as a virtual machine
For faster testing of your project programming, an ISO file for creating a virtual machine with
VMWare or VirtualBox is included.
For more information, refer to the help for the HS Expert.
To Next Page
Loading...
