Introduction
4
11.2020/V 2.3
1. Introduction
The Gira HomeServer is a gateway for visualising and controlling the complete electrical
installation of buildings, provided they are equipped with the KNX system. These can be both
private and company buildings.
The KNX functions can be monitored and controlled at any time and from anywhere, exter-
nally and internally. Monitoring and control is done using smartphone, PC, iPad, iPhone or
devices with an Internet browser and app. Faults, measured values and actuator or sensor
states can be transmitted via PUSH notification, text message and e-mail.
As the software for the device purchased by you is constantly being further developed and
updated, information in this manual may no longer be up-to-date.
The latest product information is always available on the Gira website:
http://www.gira.de
Current software updates and documentation for your product are also available at https://
www.download.gira.de.
The information, data, values etc. included in these documents may be changed without
notice. The illustrations are likewise subject to change.
Technical modifications reserved!
For easier reading, only the term Gira HomeServer is used in this description. All information
relating to the Gira HomeServer applies both to the Gira HomeServer and to the Gira Facili-
tyServer. Properties and functions relating specifically to the Gira FacilityServer are marked
accordingly.
1.1 Scope of delivery
The following items are included in the scope of delivery:
– 1 x Gira HomeServer 4 / Gira FacilityServer 4
– 1 x mains cable
1.2 Interfaces and connection options
The Gira HomeServer has the following interfaces and connection options:
– Mains voltage connection 230 V
– RS232 interface for KNX and programming (up to version 4.10.x)
– Network connection for RJ45 Cat 5 Ethernet TCP/IP
To Next Page
Loading...
