LEAD RAIL LATERAL ADJUSTMENT
20 min.
LEAD RAIL REPLACEMENT
2 hrs.
MOTOR LIMIT ADJUSTMENT 20
min.
ANEMOMETER REPLACEMENT
30 min.
CURRENT LIMITING DEVICE REPLACEMENT 30
min.
ANEMOMETER CONTROLLER REPLACEMENT 30
min.
ANEMOMETER CONTROLLER REPROGRAMMING 30
min.
REMOTE MOTOR/SWITCH/TRANSMITTER REPROGRAMMING 20
min.
ANEMOMETER WALL SWITCH REPLACEMENT 20
min.
WEATHER STRIPPING REPLACEMENT
1 hr.
MOTION SENSOR REPLACEMENT
20 min.
RESTRINGING THE CROSSBAR
1 hr.
•
These totals are applicable to flat-rate compensation based on applicable hourly
service rates.
•
Authorization must be obtained before beginning any repair. All claims will
require the defective parts returned prior to any payment. If returned parts are
found to be not defective there will be a 20% restocking fee. All replacement parts
will be shipped by carrier via ground.
•
If you have any questions or concerns about any of the labor functions or the
time allowed, please contact Girard Systems’ Warranty and Returns Department
at (800)382-8442
To Next Page
Loading...
