EasyManua.ls Logo

Girard Systems VISION - Page 17

Girard Systems VISION
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Fig 10
PROBLEM:
The motor side of the awning closes when the awning is retracted but the opposite end
does not.
SOLUTION:
Refer to “Adjusting the Lead Rail” on page 20. If this does not solve the issue please
call the Girard Systems service line at (949)259-4000 or toll free at (800)382-8442.
PROBLEM:
Motor will not operate.
SOLUTION:
Check that all of the GFI switches in the vehicle are turned on.
If your vehicle has an Awnings Power Main Switch, locate that switch and make
sure it is in the ON position.
Check that the motor’s thermal protection circuit breaker has not tripped. The
110V AC motor supplied in your VISION Awning is designed for intermittent use
and may cut out temporarily if it has overheated. When this occurs you must
FABRIC SCREW

Related product manuals