Need help?Do you have a question about the Glendinning EEC4 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Manufacturer | Glendinning |
| Model | EEC4 |
| Communication Protocol | CAN bus |
| Enclosure Rating | IP67 |
Planning considerations before starting the EEC4 system installation.
Steps for securely mounting the EEC4 Control Processor unit.
Procedure for installing the EEC4 control head on the vessel.
Instructions for connecting the CANbus communication cables.
Connecting the engine throttle and transmission harnesses.
Connecting the DC power harness to the system.
Procedure for installing the bonding wire for safety.
Verifying component installation and system operational checks.
Schematics and diagrams for system wiring and connections.
Physical dimensions and cutout guides for components.
Steps to set the unique identifier for each control head.
Options for customizing system behavior and settings.
To Next Page