Glendinning EEC4 User Manual

Return System Settings to Default Option
The Return System Settings to Default Option allows you to return the system to it’s factory default set-
tings.
32
EEC4 Installation Manual
Press ACTIVE
10 times for
Return to
Defaults Option
ACTIVE & STBD Neutral LEDs will
begin to flash
Press
WARM to
save option
selection
You may continue to other configuration options
on the preceding pages or you may choose to
EXIT CONFIGURATION MODE by turning
system OFF, moving control handles back to
NEUTRAL, and then turn system ON again.
ACTION RESULT
To Change System Startup Setting Follow These Steps:
Enter Configuration Mode as described in section 2.4A (pg. 29)

Glendinning EEC4 Specifications

General

Brand	Glendinning
Model	EEC4
Category	Control Unit
Language	English