GB-750 Firewall Appliance Product Guide16
3 – Set Up Default Configuration 17
Re-configure Workstation
Re-congure your workstation back to its original IP address, now on the
same network as the GTA Firewall.
Access the GB-750
After re-conguring your workstation, you can access the GB-750 using the
new IP address assigned to the Protected Network interface.
The GB-750 should now be active and functioning in default security mode,
(all internal users are allowed outbound and no unsolicited inbound connec-
tions are allowed). You can now perform any additional conguration tasks.
See the GNAT BOX SYSTEM SOFTWARE USER'S GUIDE for more information.
Basic Configuration using GBAdmin
Select GBAdmin (GBAdmin.exe) from the program menu. This opens a blank
GBAdmin interface, similar to the following screen: Select File from the
toolbar, then select Open.
GBAdmin Interface
Note
GBAdmin must be installed on a local workstation running Windows
95, 98, NT 4.0, XP, Me, or Windows 2000.
To Next Page
Loading...
Need help?
General