GB-750 Firewall Appliance Product Guide12 3 – Set Up Default Configuration 13
3 Set Up Default Configuration
The following sections will describe how to set up your GB-750 in the default
conguration, in which all internal users are allowed outbound and no unsolic-
ited inbound connections are allowed.
Basic Configuration using Web Interface
Start a web browser on your workstation and enter the following URL into the
browser Address eld: https://192.168.71.254.
Note
Web setup requires a browser that supports frames.
If your network and cables are congured correctly, you will be prompted
with a Security Alert dialog indicating that the Certicate Authority is not one
you have chosen to trust; that the security certicate date is valid; and that the
name on the security certicate does not match the name of the site.
Security Alert
Select Yes, or if your alert differs, choose the selection that allows you to
proceed. You will establish your GB-750 certicate once you have logged on
to the rewall. See the GNAT BOX SYSTEM SOFTWARE USER'S GUIDE.
To Next Page
Loading...
Need help?
General