Globalsat TR-206 - Page 51

51
7. Alert
7.1 Emergency
When SOS (Emergency) button is hold and pressed over 2 seconds, The SOS
alarm flag will be raised and TR-206 will start to send emergency reports by
SMS and/or TCP/UDP with the interval defined by ‘H2’.
The SMS reports can be configured to send to maximum 6 sets of phone
numbers. The number of reports is defined by ‘H1’. If you’d like to stop SOS
report, please send “Na” command to TR-206.
Emergency report can also be sent to server by TCP or UDP. The number of
report is defined by ‘H3’. If H3 is set to zero, then the report will be sent
continuously until the SOS flag is dismissed by server.
The related parameters are listed in the following table:
Code
word
Parameters
Value
Description
G0
SMS Phone number 1
char(20)
G1
SMS Phone number 2
char(20)
G2
SMS Phone number 3
char(20)
G3
SMS Phone number 4
char(20)
G4
SMS Phone number 5
char(20)
G5
SMS Phone number 6
char(20)
H0
Report media
Media
type
Please refer to 2.9 Report
media
H1
Number of SMS Report
u16
1 ~ 65535
H2
report interval
u16
3 ~ 65535
H3
Number of GPRS Report
u8
0=continue sending SOS
alarm report till receive stop
command