Globalsat TR-206 - Page 74

74
,0A8C,E726,11,11"*01!
11.4 SMS Report
If the SMS flag of the report media is enabled when TR-206 is generating
report, a SMS report will be sent to the phone number defined by F0.
There’re two types of SMS message. The first one is the same as GPRS
messages described in the above sections. The second type is a
configurable text which is designed for easy reading. Parameter ‘F2’ is used
to control SMS message type.
Codeword
Parameters
Value
Description
F0
SMS return phone number
char(20)
F2
SMS format
1/0
0= Same as GPRS format
1= Text format
For type 2 SMS report, each report type has a corresponding setting that
defined the content of the SMS text. The setting is a combination of text and
report parameter. A report parameter is represented by a leading ‘$’ and its
codeword. For example, ‘$A’ means GPS fix status. ‘$+’ represents a carriage
return character. TR-206 will replace it by its value/status.
Note:
The leading “00” is necessary for format control. Please don’t change
or delete it.
The following table lists the related parameters for SMS report format settings.
Please refer to “2.6. Parameters of Report Messages” for the codeword.
Code
word
Parameters
Value
Description
Fa
SMS format 1
report string
for ping
char(96)
"00Ping!$+IMEI:$S$+Time:$C$+GPS
$A$+$6,$1$+Speed:$I km/hr$+Power:$N%"