Globe G10 Instruction Manual

Page 5
Globe Slicer Safety Tips
SHARP KNIFE BLADE
TO AVOID SERIOUS PERSONAL INJURY:
• NEVER touch this slicer without training and authorization from your supervisor or if you are under 18 years
old. Read this instruction manual rst.
• ONLY install the slicer on a level nonskid surface that is nonammable and is located in a clean, well-lighted
work area away from children and visitors.
• ALWAYS ground slicer utilizing proper power source.
• NEVER TOUCH KNIFE. Keep hands and arms away from all moving parts.
• NEVER OPERATE slicer without knife cover and knife ring guard securely installed.
• BEFORE TURNING SLICER ON, place auto engage lever in “Manual” position (G12A only).
• BE ALERT. The food chute moves back and forth during automatic operation and can move in either
direction on start up (G12A only).
• NEVER put hand into the chute arm opening on the right side of the slicer.
• ONLY USE FOOD CHUTE HANDLE to push the food chute during manual slicing.
• ONLY USE THE Endweight HANDLE, NOT YOUR HAND, to hold food products when slicing.
Never put your hand on or around food chute when slicer is on.
• DO NOT CATCH SLICES WITH YOUR HAND. Let slices drop onto the receiving area.
• ALWAYS turn slicer off, return auto engage lever to “Manual” position (G12A only) and turn the
slice thickness dial clockwise until it stops after each use.
• BEFORE CLEANING, SHARPENING, SERVICING, OR REMOVING ANY PARTS, always turn slicer off,
turn the slice thickness dial clockwise until it stops, remove food chute and unplug power cord.
• USE ONLY GLOBE SLICER ACCESSORIES properly installed.

Globe G10 Specifications

General

Brand	Globe
Model	G10
Category	Kitchen Appliances
Language	English